Base Plate Removable Tab


Click Image to Enlarge

Additional Images
Product Information
Online Price:
$592.90

Online Availability:
Out Of Stock
In Store Availability:
Call 301-898-3300

In store price may be different from the online price above
Item:
5602628
Mfr #:
BX2628
UPC:
798459084954
Rating:
Not Yet Reviewed
Sorry, this item is no longer available for purchase.
 
Custom fit bracket kit for attaching to cars frame to allow towing by motorhome or another tow vehicle.

 PROP 65 WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

Application Notes
MfrNameMakeModelYearMfrPNNotesIR
Blue OXFordEdge (Includes Adaptive Cruise Control) (No 2.0L EcoBoost)2011BX26281,2,3,4,6,12,133
Notes: 1: Bumper fascia must be removed and replaced during installation., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill)., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************, 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major)., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 6: Headlights must be removed and reinstalled during installation., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 6: Headlights must be removed and reinstalled during installation.: 6: 85-88 Sprints utilized two types of sway bar mounting brackets. If the brackets are perpendicular to the sway bar, then the 110-1 is needed. If the brackets are at an angle to the sway bar, then the 109-1 is necessary., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 6: Headlights must be removed and reinstalled during installation.: 6: 85-88 Sprints utilized two types of sway bar mounting brackets. If the brackets are perpendicular to the sway bar, then the 110-1 is needed. If the brackets are at an angle to the sway bar, then the 109-1 is necessary.: 6: If equipped with optional Mopar Tube Bumper.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 6: Headlights must be removed and reinstalled during installation.: 6: 85-88 Sprints utilized two types of sway bar mounting brackets. If the brackets are perpendicular to the sway bar, then the 110-1 is needed. If the brackets are at an angle to the sway bar, then the 109-1 is necessary.: 6: If equipped with optional Mopar Tube Bumper.: 12: Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The SO:BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 6: Headlights must be removed and reinstalled during installation.: 6: 85-88 Sprints utilized two types of sway bar mounting brackets. If the brackets are perpendicular to the sway bar, then the 110-1 is needed. If the brackets are at an angle to the sway bar, then the 109-1 is necessary.: 6: If equipped with optional Mopar Tube Bumper.: 12: Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The SO:BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.: 12: 2 different tie downs replacements can be found on the 84-85 Honda Accords & 88-90 Acura Legends. A measurement must be taken from the center of the first bolt going up into the sub-frame directly behind the tie down plate to the center of the eye on the tie down plate. If the measurement is approx. 3 1/2", use the 1503-1 bracket. If this measurement is approx. 4 3/4" use the 1505-1 bracket.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 6: Headlights must be removed and reinstalled during installation.: 6: 85-88 Sprints utilized two types of sway bar mounting brackets. If the brackets are perpendicular to the sway bar, then the 110-1 is needed. If the brackets are at an angle to the sway bar, then the 109-1 is necessary.: 6: If equipped with optional Mopar Tube Bumper.: 12: Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The SO:BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.: 12: 2 different tie downs replacements can be found on the 84-85 Honda Accords & 88-90 Acura Legends. A measurement must be taken from the center of the first bolt going up into the sub-frame directly behind the tie down plate to the center of the eye on the tie down plate. If the measurement is approx. 3 1/2", use the 1503-1 bracket. If this measurement is approx. 4 3/4" use the 1505-1 bracket.: 13: Use only with motorhome mount tow bars or the 5608833 or 5688151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 22" or greater spaced tabs. The Adventurer may be used with baseplates having 24"-40" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 6: Headlights must be removed and reinstalled during installation.: 6: 85-88 Sprints utilized two types of sway bar mounting brackets. If the brackets are perpendicular to the sway bar, then the 110-1 is needed. If the brackets are at an angle to the sway bar, then the 109-1 is necessary.: 6: If equipped with optional Mopar Tube Bumper.: 12: Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The SO:BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.: 12: 2 different tie downs replacements can be found on the 84-85 Honda Accords & 88-90 Acura Legends. A measurement must be taken from the center of the first bolt going up into the sub-frame directly behind the tie down plate to the center of the eye on the tie down plate. If the measurement is approx. 3 1/2", use the 1503-1 bracket. If this measurement is approx. 4 3/4" use the 1505-1 bracket.: 13: Use only with motorhome mount tow bars or the 5608833 or 5688151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 22" or greater spaced tabs. The Adventurer may be used with baseplates having 24"-40" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs.: 13: If the vehicle has tack-welded tie down plates, the plates will need to be removed before mounting brackets. This will add to the installation time.

Product Reviews No Product Reviews Available for This Item.
To add a review, please Login or Create New Account.